Empirical Systems Aerospace, Inc.

Electrical and Electronics Drafter

San Luis Obispo, CA
Full Time
Engineering
Mid Level

 

Electrical and Electronics Drafter 

Job Summary: 

We are seeking a highly detail-oriented Electrical Drafter with strong experience in SolidWorks Electrical to support wiring and electrical system design. This role focuses on the development of aircraft wiring documentation, harness assemblies, and electrical integration packages. 

Responsibilities and Duties: 

  • Create and maintain detailed wiring schematics, harness drawings, and interconnect diagrams using SolidWorks Electrical. 

  • Develop 2D and 3D electrical routing models integrated with mechanical assemblies. 

  • Produce complete wiring documentation packages including: 

  • Wire lists and cut lists 

  • From-to wiring tables 

  • Connector pinouts 

  • Backshell configurations 

  • Shield terminations and grounding schemes 

  • Splice and termination details 

  • Generate and maintain accurate Bills of Materials (BOMs) for harness assemblies. 

  • Ensure compliance with aerospace standards, including IPC and military specifications where applicable. 

  • Support design for manufacturability (DFM) and assembly reviews for harness fabrication. 

  • Collaborate with electrical engineers, systems engineers, and mechanical designers to ensure proper routing, separation, EMI protection, and structural integration. 

  • Incorporate engineering changes (ECOs/ECNs) into released drawing packages with strict configuration control. 

  • Support and help maintain configuration control within Altium and Solidworks Electrical 

  • Support prototype builds, qualification testing, and production troubleshooting. 

  • Maintain documentation in compliance with AS9100 and internal quality systems. 

Required Qualifications and Skills: 

  • Minimum 3 years of experience in aerospace or other high-reliability electrical environments. 

  • Proficiency in SolidWorks Electrical (schematic design, harness design, 3D routing). 

  • Strong understanding of aerospace wiring practices 

  • Experience creating detailed harness drawings and wiring documentation packages. 

  • Working knowledge of aerospace connectors (e.g., MIL-DTL series), backshells, and shielding. 

  • Familiarity with configuration management and revision control processes. 

  • Ability to interpret system block diagrams, interface control documents (ICDs), and electrical requirements. 

  • Strong attention to detail and documentation accuracy. 

Desired Qualifications and Skills: 

  • IPC certifications, such as: 

  • IPC/WHMA-A-620 (Requirements and Acceptance for Cable and Wire Harness Assemblies) 

  • IPC-A-610 (Acceptability of Electronic Assemblies) 

  • IPC J-STD-001 (Requirements for Soldered Electrical and Electronic Assemblies) 

  • Experience with Altium Designer for PCB schematic capture and layout. 

  • Familiarity with aerospace standards such as MIL-STD-1553, DO-160, or related environmental/EMI standards. 

  • Experience working within an AS9100-certified quality management system. 

  • Associate’s or Bachelor's degree in electrical engineering technology, Aerospace Engineering Technology, or related field. 

Comprehensive Benefits & Perks: 

  • Health & Wellness: Choose from three health, dental, and vision plans - including a 100% employer-paid option covering both employees and their families. 

  • Paid Time Off: Enjoy 120 hours of PTO, 80 hours accrued plus an additional 40 hours of holiday break pay in addition to Christmas Eve, Christmas Day, and New Year’s Day off. 

  • Life Insurance: $25,000 employer-paid life insurance policy, with the option to purchase additional coverage for employees and their families. 

  • Supplemental Coverage: Access optional benefits such as Critical Illness, Hospital Indemnity, Accident Insurance, and Critical Illness with Skin Cancer coverage. 

  • Health Savings Account (HSA): Take advantage of a tax-advantaged HSA to manage medical expenses. 

  • Retirement Savings: 401(k) with a company match to support your financial future. 

  • Paid Holidays: Enjoy 9 paid holidays throughout the year. 

  • Work Environment: A casual dress code, complimentary snacks, and a welcoming company culture. 

  • Ideal Location: Work in an area that offers an outstanding quality of life - a perfect place to live, work, and play! 

Company Overview 

Empirical Systems Aerospace, Inc (ESAero) is a leader in aerospace engineering, product development, and manufacturing, dedicated to delivering high-quality, innovative, and cost-effective solutions to the industry. We specialize in cutting-edge system design, rapid product development, precision manufacturing, comprehensive testing, and technology demonstrations to support the evolving needs of the aerospace community. Committed to excellence, on-time delivery, and continuous growth, we invest in infrastructure to expand our manufacturing and aftermarket capabilities while maintaining the highest standards of engineering services. 

At ESAero, we don’t just build products, we engineer solutions that propel  

the aerospace industry forward. 

**This position is fully on-site at ESAero in San Luis Obispo, CA** 

_________________________________________________________________ 

ESAero is an equal opportunity employer.  
E-Verify participation required for employment.  
Must present proof of authorization to work in the United States.     
Must be able to pass background check and drug test.    
Hiring Range: $30-$38.00 Hourly/Non-Exempt 

 

 

Share

Apply for this position

Required*
We've received your resume. Click here to update it.
Attach resume or Paste resume
Attach resume as .pdf, .doc, .docx, .odt, .txt, or .rtf (limit 5MB) or Paste resume

Paste your resume here or Attach resume file

To comply with government Equal Employment Opportunity and/or Affirmative Action reporting regulations, we are requesting (but NOT requiring) that you enter this personal data. This information will not be used in connection with any employment decisions, and will be used solely as permitted by state and federal law. Your voluntary cooperation would be appreciated. Learn more.
Invitation for Job Applicants to Self-Identify as a U.S. Veteran
  • A “disabled veteran” is one of the following:
    • a veteran of the U.S. military, ground, naval or air service who is entitled to compensation (or who but for the receipt of military retired pay would be entitled to compensation) under laws administered by the Secretary of Veterans Affairs; or
    • a person who was discharged or released from active duty because of a service-connected disability.
  • A “recently separated veteran” means any veteran during the three-year period beginning on the date of such veteran's discharge or release from active duty in the U.S. military, ground, naval, or air service.
  • An “active duty wartime or campaign badge veteran” means a veteran who served on active duty in the U.S. military, ground, naval or air service during a war, or in a campaign or expedition for which a campaign badge has been authorized under the laws administered by the Department of Defense.
  • An “Armed forces service medal veteran” means a veteran who, while serving on active duty in the U.S. military, ground, naval or air service, participated in a United States military operation for which an Armed Forces service medal was awarded pursuant to Executive Order 12985.
Veteran status


Voluntary Self-Identification of Disability
Voluntary Self-Identification of Disability Form CC-305
OMB Control Number 1250-0005
Expires 04/30/2026
Why are you being asked to complete this form?

We are a federal contractor or subcontractor. The law requires us to provide equal employment opportunity to qualified people with disabilities. We have a goal of having at least 7% of our workers as people with disabilities. The law says we must measure our progress towards this goal. To do this, we must ask applicants and employees if they have a disability or have ever had one. People can become disabled, so we need to ask this question at least every five years.

Completing this form is voluntary, and we hope that you will choose to do so. Your answer is confidential. No one who makes hiring decisions will see it. Your decision to complete the form and your answer will not harm you in any way. If you want to learn more about the law or this form, visit the U.S. Department of Labor’s Office of Federal Contract Compliance Programs (OFCCP) website at www.dol.gov/ofccp.

How do you know if you have a disability?

A disability is a condition that substantially limits one or more of your “major life activities.” If you have or have ever had such a condition, you are a person with a disability. Disabilities include, but are not limited to:

  • Alcohol or other substance use disorder (not currently using drugs illegally)
  • Autoimmune disorder, for example, lupus, fibromyalgia, rheumatoid arthritis, HIV/AIDS
  • Blind or low vision
  • Cancer (past or present)
  • Cardiovascular or heart disease
  • Celiac disease
  • Cerebral palsy
  • Deaf or serious difficulty hearing
  • Diabetes
  • Disfigurement, for example, disfigurement caused by burns, wounds, accidents, or congenital disorders
  • Epilepsy or other seizure disorder
  • Gastrointestinal disorders, for example, Crohn's Disease, irritable bowel syndrome
  • Intellectual or developmental disability
  • Mental health conditions, for example, depression, bipolar disorder, anxiety disorder, schizophrenia, PTSD
  • Missing limbs or partially missing limbs
  • Mobility impairment, benefiting from the use of a wheelchair, scooter, walker, leg brace(s) and/or other supports
  • Nervous system condition, for example, migraine headaches, Parkinson’s disease, multiple sclerosis (MS)
  • Neurodivergence, for example, attention-deficit/hyperactivity disorder (ADHD), autism spectrum disorder, dyslexia, dyspraxia, other learning disabilities
  • Partial or complete paralysis (any cause)
  • Pulmonary or respiratory conditions, for example, tuberculosis, asthma, emphysema
  • Short stature (dwarfism)
  • Traumatic brain injury
Please check one of the boxes below:

PUBLIC BURDEN STATEMENT: According to the Paperwork Reduction Act of 1995 no persons are required to respond to a collection of information unless such collection displays a valid OMB control number. This survey should take about 5 minutes to complete.

You must enter your name and date
Human Check*